Snom M215 SC Bundle - Base Station Web User Interface (WUI); Default User Names and Passwords; Finding the IP Address of the Base Station; Accessing the WUI

50
v1.01
M215SC User Manual Base station web user interface (WUI)
Base station web user interface (WUI)
The base station has a web user interface (WUI). If you log on in admin mode, you have access to all settings. In
user mode, you can view network status and registration information about your handset on the System Status
and Handset Status pages, and you can configure the following features:
◦ Call settings
◦ User preferences
◦ Base directory
◦ Blacklist (deny list)
◦ User password
Your computer must be connected to the same network as your base station in order for you to use the WUI.
Default user names and passwords
◦ For using the device in admin mode.
User name: admin
Password: admin
◦ For using the device in user mode.
User name: user
Password: user
Finding the IP address of the base station
To access the base station's web user interface (WUI), you need its IP address. You can look it up on any handset
registered at the base station (see "Registering the handset to the base station" on page 25).
1. Press
or
MENU
to open the "Main Menu" of the handset.
2. In the Main Menu, scroll to "Status" and press
or
ENTER
. In the Status menu, "Network" is highlighted.
3. Press press
or
ENTER
. In the Network menu, "IPv4" is highlighted.
4. Press press
or
ENTER
.
1HWZRUN
'+&3
(QDEOHG
,3$GGUHVV

%$&. 2.
5. Make a note of the IP address. scroll to the respective submenu "Low batt tone", "Link lost tone", or "Key
tone" and press
or
ENTER
.
Accessing the WUI
1. Open a web browser on your PC. Enter the IP address, preceded by "http://" in the address bar (for
example: http://192.168.10.115) and press ENTER.
IPv4