SolarMax SM30HT4 - Procedure

en
35
Note
 Entering an incorrect country setting may lead to problems regarding
inverter operation and to the withdrawal of the operating license by the
respective grid operator.
 Contact your grid operator or the SolarMax Service Center if you have any
doubt regarding the settings you must select.
 You can restart initial start-up by pressing in the "Conrmation"
menu at any time.
6�2�2 Procedure
1. Switch on the inverter as described in Section 6.1. The "Initial setup" menu will be
displayed:
Figure 25 Selecting the display language and updating the system time
2. Select the display language from the "Language" menu.
3. If necessary, update the time and the date.
– The inverter saves the date entered as the initial start-up date.
4. Press on to conrm the entries.
– The "Country" menu will be displayed:
Figure 26 Selecting the country setting
5. Select the country setting.
– Press to conrm your entry.
– Depending on the country setting selected, additional menus may be displayed
(see Section 6.2.3).