en
7
2�3 Symbols on inverter
Symbol Description
O
The DC disconnector is switched off (the contacts are open).
I
The DC disconnector is switched on (the contacts are closed).
+ −
Positive or negative pole of input voltage (DC)
Risk of death from high voltages! Only qualied electricians may
perform work on the inverter.
Careful - hot surfaces!
5 min
Risk of death due to high voltages in the inverter! De-energize the
inverter. Proceed to wait for 5 minutes before opening the inverter.
Only qualied electricians may perform work on the inverter.
Operating instructions - Please read and follow the instructions
supplied with the inverter. Do not remove any symbols on the inverter.
Replace any damaged symbols.
CE marking - The inverter complies with the requirements of the
European EMC Directive 2004/108/EC and the Low Voltage Directive
2006/95/EC (see Section 11).
GS marking - The inverter complies with the relevant requirements of
the German Product Safety Act.
Do not dispose of the inverter and its accessory components in the
household waste.
To Next Page
Loading...
