USE OF THE MANUAL
Chapter 2
Chapter
3
Chapter 4
Chapter
5
Chapter 6
Chapter 7
Chapter 9
Chapter 10
Chapter 11
Describes how to install
the instrument. This procedure should
be
followed implicitly,
to ensure safe and reliable operation
of the
intrumeni.
Introduces the front
panel controls and, by means of simple
examples,
shows
you
how
to start using the instrument.
Summarises the control
menus.
This information, which
also appears
on a blue pull-out
card at the
front
of the manual, is intended
as a
memor
y
aid for experienced
users.
Is an encyclopedia
of menu terms and explains the meaning
and
backgr
ound
of
each individual control setting.
Explains
how
to connect the
instrument to the
item under
test.
Gives detailed information
on how to control the instrument
remotely,
from
the
GPIR.
Guidance in the
use
of RS 423 is given
also.
Lists the error messages.
Error messages are displayed (and an error
code is
output
to a remote device)
when
a bad command has been given
to
the instrument
or an unacceptable control condition exists.
Shows how the
measurement results may be scaled and/or limits
checked.
Shows how the instrument
may be made to store a series of
commands,
to be
executed
later as a learnt
program.
1.4
JWS/1260/2
To Next Page
Loading...
