1 INTRODUCTION
This chapter
lists the instrument
remote commands. The
commands are the
same for
RS423
and GPIB operation.
They are presented in menu
order to relate
to Chapter
5,
"Menu Terms”.
2 COMMAND
SYNTAX
The majority
of codes are qualified
by a numeric argument.
In the following
lists:
F is
a floating point number
±n.nnrtnnnri E ±xx,
I is
an integer up to 2 digits,
U
is two
integers of
up to
2 digits
each, separated
by a comma.
Default settings
are shown in italics.
Including
a query
(?)
with
a command code, in any position,
returns the
associated
parameter
setting. Additional
query commands are available
for examining
control
information not
accessible
in this way.
3 COMMAND
SUMMARY
The command summary
appears
on pages 8.3 through 8. 13.
8.2
JWS/1 260/2
To Next Page
Loading...
