Solartron 1260 - Page 99

8.3.5 XOFF/XON
Transmit
off
transmit
on
software
handshake
facility.
• [enable]
handshake
enabled;
XOFF
and
XON
used.
•
[disable]
handshake
disabled;
XOFF
and XON
not used.
This
selection
governs
the
use of the XON/XOFF
code
by the instrument,
i.e. whether
or
not the
instrument
outputs the command
to a device
sending
data
to
it.
The
instrument will
always
respond
to an XON/XOFF
command
from
a
controller.
8.4
[FILE
CONFIGURE]
History
file parameters.
8.4.1
8.4.2
FORMAT
#
CLEAR
Measurements
to be filed.
Specified
according
to measurement
mode
[normal]
File
set for normal
measurements.
[group delay]
File
set for group
delay measurements.
The history
file must
be cleared
before
changing the
format.
History file
clear
function,
auto or manual.
*
[auto]
File
cleared
automatically,
at start of every
sweep.
• [manual]
File cleared
manually,
from
VIEW FILE
menu.
8.4.3 STATS
The results
from
which statistics
are
to be derived:
*
[par
1]
Statistics computed
from
Parameter
1*.
• [par
2]
Statistics
computed from
Parameter
2*.
*
Displayed
parameter,
see Section
4,
Display.
5.30
JWS/1
260/1