A-17
BVW-55
A. Setting Check Sheet
ITEM Factory setting Current Bank 1 Bank 2 Bank 3 Bank 4
721: Y/C DELAY 800
723: INPUT VIDEO BLACK
SUB-ITEM 0: All line ___
9: 9,322 line THROU
10: 10,323 line THROU
11: 11,324 line THROU
12: 12,325 line THROU
13: 13,326 line THROU
14: 14,327 line THROU
15: 15,328 line THROU
16: 16,329 line THROU
17: 17,330 line THROU
18: 18,331 line THROU
19: 19,332 line THROU
20: 20,333 line THROU
21: 21,334 line THROU
22: 22,335 line THROU
726: H BLANKING WIDTH WIDE
728: OUTPUT SCH PHASE 800H
731: EE MODE INPUT
ITEM-900 series: Digital process parameter
ITEM Factory setting Current Bank 1 Bank 2 Bank 3 Bank 4
912: SEQUENTIAL RECORD INPUT SIGNAL PARALLEL
ITEM-F00 series: Adjustment use only
It is unnecessary to reset for normal operation.
Do not change setting of each item from its factory-set position.
ITEM Factory setting Current Bank 1 Bank 2 Bank 3 Bank 4
F01: AUDIO NR IN SP MODE ON
F02: EMERGENCY TAPE PROTECTION ENA
F16: DEVICE TYPE MODIFY 0
F21: PROCESS CONT VR OFF
625/50 system
To Next Page
Loading...
