4-50
BVW-55 P2
4-15. Fan Motor Replacement
w
If the fan motor is out of order, the inside temperature of the unit will rise.
Touching the inside in this state may cause a burn. When replacing the fan
motor, perform the replacement after powering off until the inside cools off.
Outline
Replacement
Fan motor removal
Fan motor Installation
Connector panel installation
Operation check
Preparations
1. Turn off the power.
2. Open the connector panel.
(Refer to the maintenance manual Part 1, Section 1-6.)
Tools
. Torque screwdriver (3 kg.cm): J-6325-400-A
. Torque screwdriver bit (for M2): J-6325-380-A
4-15. Fan Motor Replacement
To Next Page
Loading...
