Sony BVW-55 User Manual

5
BVW-55 P2
Manual Structure
Purpose of this manual
This manual is the maintenance manual part 2 volume 1 of videocassette recorder
BVW-55.
This maintenance manual part 2 (Volume 1 and Volume 2) is intended for use by
trained system and service engineers, and provides the information that premises the
parts level service (parts replacement, guideline for adjustment, schematic diagrams,
board layouts, detailed parts list) .
This manual (volume 1) explains about parts replacement and guideline for adjust-
ment.
Related manuals
Besides this “Maintenance manual part 2”, the following manuals are available for
videocassette recorder BVW-55.
..
..
. Operation Manual (supplied with the BVW-55)
This manual is necessary for application and operation of the BVW-55.
..
..
. Maintenance Manual Part 1
(supplied with the BVW-55)
This manual describes the setting and maintenance information.
..
..
. Protocol Manual of Remote (9-pin) Connector (available on request)
This manual explains the protocol for controlling the VTR via the RS-422A (9-pin
serial remote) . If this manual is required, please contact to Sony’s service organi-
zation.
..
..
. BKNW-225 Maintenance Manual (supplied with the BKNW-225)
This manual describes the spare parts list and the exploded view for the service
parts of the docking kit BKNW-225, that is used when the two BVWs are cou-
pled.

Sony BVW-55 Specifications

General

Type	Professional VCR
Video Format	Betacam SP
Video Standard	NTSC/PAL
Power Requirements	AC 100-240 V, 50/60 Hz
Video Heads	2
Frequency Response	20 Hz to 20 kHz
Signal-to-Noise Ratio	48 dB
Input/Output Connectors	Audio XLR