Sony BVW-55 - General Information on Tape Path Adjustment; Tape Path Alignment

5-1
BVW-55 P2
Section 5
Tape Path Alignment
5-1. General Information on Tape Path Adjustment
This section describes the fundamental knowledge such as preparation and prior knowledge to perform
the tape path system check and adjustment.
1. Index
The checks and adjustments described in Section 5-4 through Section 5-11 are closely related to each
other.
Perform the checks and adjustments referring to the following flow chart.
BEGIN
Tape running check and adjustment

Video tracking check and adjustment

CTL head height check and adjustment

CTL head position check and adjustment

AT head azimuth check and adjustment

AT head height check and adjustment

END
AT head head-to-tape contact check

AT head position check and adjustment

When adjusting the CTL head position

When adjusting the AT head height


