Sony BVW-55 - Page 283

4-11
BVW-55 P2
CN401
Precision
PWH1.4 x 3.5
CTL/FE head assembly
SV-206 board
Replacement
1. CTL/FE head assembly removal
(1) Disconnect connector CN401 on the SV-206
board.
(2) Remove the three precision screws, then
remove the CTL/FE head assembly from the
unit.
n
Be careful not to damage the video head,
drum, tape guide and other parts with a
screwdriver.
2. Full erase head removal
(1) Unsolder the two harnesses soldered to the
full erase head.
(2) Remove the one screw at the back of the
CTL/FE head assembly, then remove the full
erase head.
4-3. Full Erase Head Replacemen
Full erase head
PS2 x 5
Harness