To Next PageTo Next Page
Need help?Do you have a question about the Sony DCR-TRV620E and is the answer not in the manual?
Methods to prevent power shut-off during service.
How the self-diagnosis function works and its display types.
Understanding the 4-digit display indicating repair status and error codes.
How to access and interpret self-diagnosis codes shown in service mode.
Verification of all included accessories with part numbers.
Basic operation introduction and guide to using the manual.
Step-by-step procedure for disassembling the 2.5 LCD assembly.
Step-by-step procedure for disassembling the 3/3.5/4 LCD assembly.
Disassembly instructions for the VF-141 board and VF lens assembly.
Procedure for removing the front panel assembly.
Procedure for removing the cassette lid and cabinet (L) assemblies.
Procedure for removing the cabinet (R) assembly.
Disassembly instructions for the CRT EVF assembly.
Disassembly instructions for the VF-129 board and CRT assembly.
Disassembly instructions for the CF-69 board (2.5 LCD model).
Disassembly instructions for the CF-70 board (3/3.5 LCD model).
Disassembly instructions for the lens block.
Disassembly instructions for SE boards and control switch block.
Disassembly instructions for the VC-235 board.
Location of various circuit boards within the camcorder.
Location of flexible boards within the camcorder.
High-level overview of the camcorder's internal signal flow.
Block diagram detailing power supply distribution.
Schematic diagrams for various sections, including frame and board layouts.
Detailed schematic for the camera processor block.
Schematic diagram for the video/audio DSP and D/A converter.
Schematic diagram for the Hi8/Standard 8mm playback amplifier.
Schematic diagram for controlling the Digital8 mechanism.
Schematic diagram for the DC/DC converter power supply.
Schematic diagram for digital still control and memory stick interface.
Printed wiring board layout for SteadyShot and AV input/output.
Schematic diagram for the RGB driver and timing generator.
Printed wiring board layout for LCD driver, timing generator, and backlight.
List of required tools and initial switch settings for camera adjustments.
Procedures for initializing and modifying specific page data in the service mode.
Detailed procedures for adjusting camera system parameters like HALL, flange back, and optical axis.
Procedures for adjusting CRT electronic viewfinder parameters like centering, focus, and aberration.
Procedures for adjusting LCD electronic viewfinder parameters like initial data input and VCO.
Adjustments related to LCD display parameters like brightness, color, and contrast.
Adjustments for servo and RF systems, including reel FG and PLL.
Procedures for adjusting video system parameters like clock oscillation and chroma BPF.
Details on accessing and using the service mode for various checks and data processing.
Visual representation of disassembled parts with reference numbers.
Exploded view of the front panel components.
Exploded view of the 2.5 LCD assembly parts.
Exploded view of the cabinet (R) section for 3/3.5 LCD models.
Exploded view of the 3/3.5 LCD assembly parts.
Exploded view of the cabinet (R) section for 4 LCD models.
Exploded view of the CRT EVF block components.
Exploded view of the lens block components.
Exploded view of the mechanism chassis assembly.
Comprehensive list of all electrical parts with their specifications and references.
General
