Sony DCR-TRV620E - 2.6. CABINET (R) ASSEMBLY; 2.8. CRT EVF ASSEMBLY; 2.9. VF-129 BOARD, CRT ASSEMBLY

2-6
2-6. CABINET (R) ASSEMBLY
2-7. CRT EVF BLOCK
2-8. CRT EVF ASSEMBLY
2-9. VF-129 BOARD, CRT ASSEMBLY
5 Flat cable
(CN1105)
2 Two screws
(2 × 4)
1 Screw
(2 × 4)
4 Cabinet (R)
assembly
3 Three screws
(2 × 4)
7 Screw
(tripod)
6 Connector
(CN1109)
3 Screw
5 EVF block
2 Screw
1 Flat cable
(CN007)
4 Claw
6 Two screws
1 Harness guide
2 Two screws
(2 × 4)
3 VF base assembly
4 Flat cable
5 Rotate the
VF hinge assembly.
7 EVF assembly
1 F lock screw
3 Turn the finder assembly in
the direction of arrow A and
pull it out.
A
4 Two screws
6 EVF cabinet (upper)
assembly
7 CRT assembly
8 Screw
9 EVF tally
2 Release knob.
5 Claw
qg CRT
socket
qd Anode cable
qs Cover
0 Remove the VF-129
board in the direction
of arrow B.
B
qf Connector
(CN902)
qa Flat cable