1-2
HDS-7150/7100
1-2-3. Power Cord
For the customers in the U.S.A. and Canada
w
Be sure to use the power cords for the U.S.A and Canada that are supplied with power supply unit (HKDS-
7695/7695A). However, any power cords are not supplied with the control panel. Use the power cords for
the control panel, that suit to the country where the system is installed.
For the customers in the United Kingdom
For the customers in the all European countries except the United Kingdom
w
Use of the following power cords is recommended when the machine is used in the European countries.
1-2. Power Supply
AC inlet
For the customers in the all European countries
except the United Kingdom
Required Parts
Power Cord, 250 V 10 A (2.0 m) : ! 1-551-631-22
For HKDS-7695/7695A
AC power cord, 125 V 15 A (2.5 m) : ! 1-775-981-11
(Supplied with HKDS-7695/7695A)
AC inlet
(Main unit)
1 Harness A (MB-PA2) : 1-959-943-12
2 Harness B (MB-PB2) : 1-959-944-12
DC power cord
For BKDS-7017/2010
AC inlet
2
1
1 AC Power Cord, 125 V 10 A (2.4 m) : !1-557-377-11
2 Plug Holder B (Black) : 2-990-242-01
AC inlet
For the customers in the United Kingdom
Required Parts
Power Cord, 250 V 10 A (2.4 m) : ! 1-782-165-11
To Next Page
Loading...
