9-17
HDS-7150/7100
F1 F2 F3 F4 F5 F6 F7
F8
F9 F10
COLOR
LIMIT
MINMAX
OFF 100 0
LUM LEVEL
9-3-11. Setting of the Internal Generation Matte Signal
(1) In the set-up menu screen, press the keys on the display panel in the following sequence.
[3] (EFFECT), [F5] (MATTE)
The function key indications change as follows.
(2) Press the [F2] (COLOR LIMIT) key. Every time the key is pressed, the illegal color limiter is
selected to ON/OFF.
(3) Press the [F4] (MAX) key. Every time the key is pressed, the maximum value of luminance level is
changed.
(4) Press the [F5] (MIN) key. Every time the key is pressed, the minimum value of the luminance level
is changed.
HDS-7150
9-3. Set-up
To Next Page
Loading...
