5-2
HDS-7150/7100
5-2. Installation Space
The BKDS-2010 can be installed in the console by drilling the holes of the following specifications in the
console.
Also the unit can be installed in the SONY standard console (19-inch type) by using the rack mount metal
(RMM-3000) of an optional accessory. For the details, refer to “5-3. Installation in Console”.
n
At the rear of BKDS-2010, a space of 100 mm or more is necessary to insert or eject ROM PACK.
For using the SU-C3000 series console unit, it is recommended to use the 1U size blank panel.
BKDS-2010
5-2. Installation Space
BKDS-2010
Type A Type B
FRONT
Hole
415
391
100
or more
61.7
BKDS-2010
FRONT
15
Hole
425
401
100
or more
5
Unit : mm
To Next Page
Loading...
