10-17
HDS-7150/7100
10-3-10. Setting of the Internal Generation Matte Signal
(1) On the set-up menu screen, press the function keys in the following sequence.
[F5] (EFFECT) → [F3] (MATTE)
The EFFECT MATTE menu is displayed.
(2) Press [F2] (LIMIT) to set the illegal color limiter.
ON and OFF is switched by pressing [F2].
(3) Press [F3] (MAX) to set the maximum value of the luminance level.
100 and 107 is switched by pressing [F3].
(4) Press [F4] (MIN) to set the minimum value of the luminance level.
0 and _7 is switched by pressing [F4].
10-3-11. Setting of the Desired DME
Set whether the built-in DME (option: HKDS-7061/7071) or external DME equipment is used.
When the built-in DME is set, the VIDEO input of DME1 is fixed to the AUX1 bus, the KEY input of
DME1 is fixed to the AUX2 bus, and the DME EXT VIDEO input is fixed to the AUX3 bus.
(1) On the set-up menu screen, press the function keys in the following sequence.
[F6] (PERIPH) → [F2] (DME)
The DME menu is displayed.
(2) Press [F6] (DME INT) to select the desired DME.
INT and EXT is switched by pressing [F6].
INT : built-in DME
EXT : external DME equipment
F1 F2 F3 F4 F5 F6
EFECT
MATTE
LIMIT
OFF
MAX
100
MIN
0
F1 F2 F3 F4 F5 F6
PERPH
DME
DME
INT
HDS-7100
10-3. Set-up
To Next Page
Loading...
