Sony HDS-7150 - Matching Connectors; Hds-7150

2-7
HDS-7150/7100
Connector indication on rear panel Connector parts No. and name (cable side)
SWITCHER PANEL (SWER) D-sub 9-pin, Male
EXT DME 1, 2
Connector 9-pin, Male : 1-560-651-00
*1
SWITCHER PANEL (DME)
Junction Shell 9-pin : 1-561-749-00
SERIAL TALLY
DME PANEL
TERMINAL
EDITOR A/REMOTE 1
EDITOR B/REMOTE 2
PANEL 2/REMOTE 3
EDITOR (DME)
NETWORK D-sub 15-pin, Male
Connector 15-pin, Male : 1-564-600-11
*1
Junction Shell 15-pin : 1-563-376-11
SWITCHER GPI, DME GPI D-sub 25-pin, Male
DME PANEL
Connector 25-pin, Male : 1-560-904-11
*1
Junction Shell 25-pin : 1-563-377-11
PRIMARY INPUTS 1 to 15 BNC Coaxial Connector Plug
REF INPUT
REF OUTPUT
REF B.B INPUT
AUX BUS OUTPUTS 1 to 5
EDIT PVW OUTPUTS
ME OUTPUTS 1, 2
PGM OUTPUTS 1 to 3
CLEAN OUTPUT
PVW OUTPUT
ME PVW OUTPUT
POWER SUPPLY 1-A, B DC Power Supply Cords : Harness A (MB-PA2)
POWER SUPPLY 2-A, B : Harness B (MB-PB2)
(For the details of the power supply cord, refer to Section 1-2-3.)
*1 : The following solderless contact must be used for the plug.
AWG #18 to #22 : 1-566-493-21
AWG #22 to #24 : 1-564-774-11
AWG #24 to #30 : 1-564-775-11
2-3. Matching Connectors
When connecting cables to various connectors on the rear panel at the time of installing, connecting or
servicing, connect the following connectors or their equivalents.
2-3-1. HDS-7150
HDS-7150/7100
2-3. Matching Connectors