Sony HDS-7150 - Page 139

10-11
HDS-7150/7100
F1 F2 F3 F4 F5 F6
SYSTM
SWTCH
ANY
SELECT
F1
- - - - -
F2
- - - - -
d. Press the function key corresponding to the desired frequency mode (see the below table).
Frequency 60 59.94 50 30 25 24 23.98
Function key F2 F3 F4 F2 F3 F4 F5
MORE (F6) 1/2 2/2
The function key indication changes as follows.
e. Press [F5] (YES).
The function key indication returns to the state of step “b” or “c” and SELECT is displayed under the
selected frequency mode.
Setting the screen switching timing
n
This setting is valid only when the frequency mode is set to 60, 59.94, or 50.
a. To continue the setting after setting the number of scanning lines, the aspect ratio of the screen, or the
frequency mode, press the EXIT button.
The SYSTEM SETUP menu is displayed.
If the SYSTEM SETUP menu is already displayed, perform the setting from step “b”.
b. On the SYSTEM SETUP menu screen, press [F5] (SWITCH).
The function key indication changes as follows.
c. To set the field to ANY, press [F2] (ANY).
To set the field to F1, press [F3] (F1).
To set the field to F2, press [F4] (F2).
SELECT is displayed under the selected field.
F1 F2 F3 F4 F5 F6
SYSTM
FREQ
YES NO
Would you like to change FREQ?
HDS-7100
10-3. Set-up