Sony HDS-7150 - Page 90

7-12
HDS-7150/7100
(6) Connect the harness of the LE-147, LE-148, or LE-180 board to the connector on the KY-389A, KY-
389B, or KY-441 board.
LE-147 board : CN5 on the KY-389A or KY-389B board
LE-148 board : CN6 on the KY-389A or KY-389B board
LE-180 board : CN5 on the KY-441 board
(7) Install the LE-147, LE-148, or LE-180 board using the six screws (B2.6 x 5) supplied with the
BKDS-7003.
(8) Install the KY-389A, KY-389B, or KY-441 board.
(9) Turn on the power switch in the control panel.
(10) Close the panel.
7-2. Installation of Options for BKDS-7071
CN5
(For LE-147/180 board)
KY-389A/389B/441 board
CN6
(For LE-148 board)
P2.6 x 5
P2.6 x 5
P2.6 x 5
P2.6 x 5
P2.6 x 5
P2.6 x 5
LE-147/180 board
LE-148 board