90
One Touch Dubbing
Displays the following options for the One Touch
Dub function.
Finalize Disc (for all recordable discs except
DVD-RW (digital video disc-rewritable, minus
RW) in VR (Video Recording) mode)
Selects whether or not to finalize the disc
automatically following One Touch Dubbing
(page 79).
Screen Saver
The screen saver image appears when you do not
use the recorder for more than 10 minutes while an
on-screen display, such as the System Menu, is
displayed on your TV screen. The screen saver
image helps prevent your display device from
becoming damaged (ghosting).
Disc and Remote Control
Settings/Factory Settings
(Options)
The “Options” setup allows you to set up other
operational settings.
1 Press SYSTEM MENU (system menu) while
the recorder is in stop mode.
2 Select “SETUP,” and press ENTER (enter).
3 Select “Options,” and press ENTER
(enter).
The “Options” setup appears with the
following options. The default settings are
underlined.
Format DVD-RW (DVD-RW (digital video disc-
rewritable, minus RW) only)
The recorder automatically starts formatting in
VR (Video Recording) mode or Video mode,
whichever is selected below, when a new,
unformatted DVD-RW (digital video disc-
rewritable, minus RW) is inserted.
Dimmer
Adjusts the lighting of the front panel display.
Auto Automatically finalizes the disc
following One Touch Dubbing.
Manual
Allows you to finalize the disc
manually.
On
Turns on the screen saver function.
Off Turns off the function.
VR Automatically formats the disc in
VR (Video Recording) mode.
Video Automatically formats the disc in
Video mode.
Normal
Bright lighting.
Power
Save
Low lighting. Turns off the
lighting when the power is off.
SETUP
Format DVD-RW : VR
Settings
Options
Features
Audio
Video
Easy Setup
Command Mode :
Factory Setup
Tuner Audio :
Auto Stereo :
Auto Display :
Power Save :
Dimmer :
DVD3
Main
On
On
Off
Normal
To Next Page
Loading...
Need help?
General
