Version 5.2 Sourcefire 3D System Installation Guide 122
CHAPTER 6
HARDWARE SPECIFICATIONS
The Sourcefire 3D System is delivered on a variety of appliances to meet the
needs of your organization. See the Rack and Cabinet Mounting Options on
page 122 for information on installing the appliance in a rack.
The hardware specifications for each of the appliances are described in the
following sections:
• Sourcefire Defense Centers on page 123
• Sourcefire Series 2 Devices on page 142
• Sourcefire 7000 Series Devices on page 146
• Sourcefire 8000 Series Devices on page 172
Rack and Cabinet Mounting Options
You can mount Sourcefire appliances in racks and server cabinets. The appliance
comes with a rack-mounting kit except for the 3D500, 3D7010, 3D7020, and
3D7030. For information on mounting the appliance in a rack, refer to the
instructions delivered with the rack-mounting kit.
The 3D500 is a desktop device and can be rack-mounted. The 3D7010, 3D7020,
and 3D7030 require a tray and rack-mounting kit, available separately. You can
purchase rack and cabinet mounting kits for other appliances separately.
To Next Page
Loading...