Source fire Sourcefire 3D System - Sourcefire 3 D7110 and 3 D7120

Version 5.2 Sourcefire 3D System Installation Guide 153
Hardware Specifications
Sourcefire 7000 Series Devices
Chapter 6
Sourcefire 3D7110 and 3D7120
The 3D7110 and 3D7120 devices, part of the 71xx Family, are 1U appliances, and
are delivered with eight copper or eight fiber interfaces, each with configurable
bypass capability. See
Sourcefire Series 3 Information on page 232 for safety
considerations for 71xx Family appliances.
See the following sections for more information:
• 3D7110 and 3D7120 Chassis Front View on page 153
• 3D7110 and 3D7120 Chassis Rear View on page 159
• 3D7110 and 3D7120 Physical and Environmental Parameters on page 161
3D7110 and 3D7120 Chassis Front View
The front of the chassis contains the LCD panel, USB port, front panel, and either
copper or fiber sensing interfaces.
3D7110 and 3D7120 with Copper Interfaces (Chassis: GERY-1U-8-C-AC)
3D7110 and 3D7120 with Fiber Interfaces (Chassis: GERY-1U-8-FM-AC)
Acoustic noise 53 dBA when idle. 62 dBA at full processor load.
Operating shock No errors with half a sine wave shock of 5G (with 11 msec. duration)
Airflow
20 ft
3
(0.57 m
3
) per minute
Airflow through the appliance enters at the front and exits at the rear, with
no side ventilation.
70xx Family Physical and Environmental Parameters (Continued)
PARAMETER DESCRIPTION
LCD Panel USB 2.0 Port Sensing InterfacesFront Panel
LCD Panel USB 2.0 Port Sensing InterfacesFront Panel