Version 5.2 Sourcefire 3D System Installation Guide 121
Using the LCD Panel on a Series 3 Device
Error Alert Mode
Chapter 5
Error Alert Mode
When an error or fault condition occurs, Error Alert mode interrupts Idle Display
mode. In Error Alert mode, the LCD display flashes and displays one or more of
the errors listed in the following table.
To view multiple error alerts:
A
CCESS:
Use the multi-function keys to scroll through the list of error alerts.
For more information, see the LCD Panel Multi-Function Keys table on
page 114.
To exit Error Alert mode:
Press the appropriate multi-function key as indicated on the LCD display.
If you exit Error Alert mode before you resolve the error that triggered the
alert, the LCD panel returns to Error Alert mode.
LCD Panel Error Alerts
ERROR DESCRIPTION
Hardware alarm Alerts on hardware errors
Link state propagation Displays the link state of paired interfaces
Bypass Displays the status of inline sets configured in
bypass mode
Fan status Alerts when a fan reaches a critical condition
To Next Page
Loading...