Source fire Sourcefire 3D System - Sourcefire DC1500

Version 5.2 Sourcefire 3D System Installation Guide 129
Hardware Specifications
Sourcefire Defense Centers
Chapter 6
The DC750 (Rev 2) Physical and Environmental Parameters table describes the
physical attributes and the environmental parameters for the appliance.
Sourcefire DC1500
The DC1500 is a 1U appliance. See the following sections for more information
about the appliance:
• DC1500 Chassis Front View on page 130
• DC1500 Chassis Rear View on page 132
• DC1500 Physical and Environmental Parameters on page 134
DC750 (Rev 2) Physical and Environmental Parameters
PARAMETER DC750 (REV 2)
Form factor 1U
Dimensions (D x W x H) 21.8 in. x 17.25 in. x 1.67 in. (55.37 cm x 43.82 cm x 4.24 cm)
Max weight 33 lbs. (15 kg)
Power supply 250 W power supply for 120 VAC
6.0 Ampere maximum at 110 volts, 50/60 Hz
3.0 Ampere maximum at 220 volts, 50/60 Hz
Operating temperature 50°F to 95°F (10°C to 35°C) with the maximum rate of change not to
exceed 18°F (10°C) per hour
Non-operating
temperature
-40°F to +158°F (-40°C to +70°C)
Non-operating humidity 90%, non-condensing at 95°F (35°C)
Acoustic noise 7.0 dBA in an idle state at typical office ambient temperature (23 +/- 2°C, 73
+/- 4°F
Operating shock No errors with half a sine wave shock of 2G (with 11 msec. duration)
Package shock Operational after 24 in. (60 cm) free fall although cosmetic damage may be
present; chassis weight of 40 to 80 lbs. (18 to 36 kg)
ESD +/- 12 kV for air discharge and 8 K for contact
Airflow Front to back
System cooling
requirements
1660 BTU/hour