Version 5.2 Sourcefire 3D System Installation Guide 185
Hardware Specifications
Sourcefire 8000 Series Devices
Chapter 6
8000 Series Modules
The sensing interfaces for the 8000 Series appliances can be delivered with
copper or fiber interfaces.
WARNING! Modules are not hot-swappable. See Inserting and Removing
8000 Series Modules on page 255 for more information.
The following modules contain configurable bypass sensing interfaces:
• a quad-port 1000BASE-T copper interface with configurable bypass
capability. See Quad-Port 1000BASE-T Copper Configurable Bypass
NetMod on page 186.
• a quad-port 1000BASE-SX fiber interface with configurable bypass
capability. See Quad-Port 1000BASE-SX Fiber Configurable Bypass NetMod
on page 187 for more information.
• a dual-port 10GBASE (MMSR or SMLR) fiber interface with configurable
bypass capability. See Dual-Port 10GBASE (MMSR or SMLR) Fiber
Configurable Bypass NetMod on page 188 for more information.
• a dual-port 40GBASE-SR4 fiber interface with configurable bypass capability
(2U devices only). See Dual-Port 40GBASE-SR4 Fiber Configurable Bypass
NetMod on page 191 for more information.
The following modules contain non-bypass sensing interfaces:
• a quad-port 1000BASE-T copper interface without bypass capability. See
Quad-Port 1000BASE-T Copper Non-Bypass NetMod on page 193 for more
information.
• a quad-port 1000BASE-SX fiber interface without bypass capability. See
Quad-Port 1000BASE-SX Fiber Non-Bypass NetMod on page 194 for more
information.
• a quad-port 10GBASE (MMSR or SMLR) fiber interface without bypass
capability. See Quad-Port 10GBASE (MMSR or SMLR) Fiber Non-Bypass
NetMod on page 195 for more information.
In addition, you can use a stacking module to connect two 3D8140 or up to four
3D8250 devices to combine their processing power and increase throughput. See
Stacking Module on page 197 for more information.
To Next Page
Loading...