Source fire Sourcefire 3D System - Page 193

Version 5.2 Sourcefire 3D System Installation Guide 193
Hardware Specifications
Sourcefire 8000 Series Devices
Chapter 6
Quad-Port 1000BASE-T Copper Non-Bypass NetMod
The quad-port 1000BASE-T copper non-bypass NetMod contains four copper
ports, and link and activity LEDs.
Use the Non-Bypass Copper Link/Activity LEDs table to understand copper LEDs.
Maximum average power at
receiver
2.4 dBm
Receiver sensitivity -9.5 dBm
40GBASE-SR4 NetMod Optical Parameters (Continued)
PARAMETER 40GBASE-SR4
Link LED
Activity LED
Non-Bypass Copper Link/Activity LEDs
STATUS DESCRIPTION
Both LEDs Off The interface does not have link.
Link Amber The speed of the traffic on the interface is 10Mb or
100Mb.
Link Green The speed of the traffic on the interface is 1Gb.
Activity Blinking Green The interface has link and is passing traffic.