Source fire Sourcefire 3D System - APPENDIX C INSERTING AND REMOVING 8000 SERIES MODULES; Module Slots on the 8000 Series Appliances

Version 5.2 Sourcefire 3D System User Guide 255
APPENDIX C
INSERTING AND REMOVING 8000 SERIES
M
ODULES
The 8000 Series appliances allow for modular flexibility in your deployment. Use
the steps in this section to:
• insert a new module into an appliance
• remove or replace a preinstalled module on an appliance
The following sections describe how to insert, remove, or replace an 8000 Series
module:
• Module Slots on the 8000 Series Appliances on page 255
• Included Items on page 257
• Identifying the Module Parts on page 258
• Before You Begin on page 259
• Removing a Module or Slot Cover on page 259
• Inserting a Module or Slot Cover on page 260
Module Slots on the 8000 Series Appliances
The 8000 Series appliances can use the modules in the following slots:
• 81xx Family on page 256
• 82xx Family on page 256