Version 5.2 Sourcefire 3D System Installation Guide 152
Hardware Specifications
Sourcefire 7000 Series Devices
Chapter 6
70xx Family Physical and Environmental Parameters
The 70xx Family Physical and Environmental Parameters table describes the
physical attributes and the environmental parameters for the appliance.
70xx Family Physical and Environmental Parameters
PARAMETER DESCRIPTION
Form factor 1U, half rack width
Dimensions (D x W x H) Single chassis: 12.49 in. x 7.89 in. x 1.66 in. (31.74 cm x 20.04 cm x 4.21 cm)
2-Chassis Tray: 25.05 in. x 17.24 in. x 1.73 in. (63.62 cm x 43.8 cm x 4.44 cm)
Chassis weight
maximum installed
Chassis: 7 lbs. (3.17 kg)
Single chassis and power supply in tray: 17.7 lbs. (8.03 kg)
Double chassis and power supplies in single tray: 24.7 lbs. (11.2 kg)
Copper 1000BASE-T Gigabit copper ethernet bypass-capable interfaces in a paired configuration
Cable and distance: Cat5E at 50 m
Power supply 200 W AC power supply
Voltage: 100 VAC to 240 VAC nominal (90 VAC to 264 VAC maximum)
Current: 2A maximum over the full range
Frequency range: 50/60 Hz nominal (47 Hz to 63 Hz maximum)
Operating temperature 0°C to 40°C (32°F to 104°F)
Non-operating
temperature
-20°C to 70°C (-29°F to 158°F)
Operating humidity 5% to 95%, noncondensing
Operation beyond these limits is not guaranteed and not recommended.
Non-operating humidity 0% to 95%, non-condensing
Store the unit below 95% non-condensing relative humidity. Acclimate
below maximum operating humidity at least 48 hours prior to placing the
unit in service.
Altitude 0 ft (sea level) to 5905 ft (0 to 1800 m)
Cooling requirements 682 BTU/hour
You must provide sufficient cooling to maintain the appliance within its
required operating temperature range. Failure to do this may cause a
malfunction or damage to the appliance.
To Next Page
Loading...