Source fire Sourcefire 3D System - Page 15

Version 5.2 Sourcefire 3D System Installation Guide 15
Introduction to the Sourcefire 3D System
Sourcefire 3D System Appliances
Chapter 1
Series 3 Device Chassis Designations
The following section lists the 7000 Series and 8000 Series devices and their
respective chassis hardware codes. The chassis code appears on the regulatory
label on the outside of the chassis, and is the official reference code for hardware
certifications and safety.
7000 Series Chassis Designations
The 7000 Series Chassis Models table lists the chassis designations for the
7000 Series models available world-wide.
device clustering   
clustered stacks  3D8140,
82xx Family

interactive CLI 
Supported Capabilities by Appliance Model (Continued)
FEATURE SERIES 2
DEVICE
SERIES 2
DEFENSE
C
ENTER
SERIES 3
DEVICE
SERIES 3
DEFENSE
C
ENTER
VIRTUAL
DEVICE
VIRTUAL
DEFENSE
C
ENTER
7000 Series Chassis Models
3D DEVICE MODEL HARDWARE CHASSIS CODE
3D7010, 3D7020, and 3D7030 CHRY-1U-AC
3D7110 and 3D7120 (Copper) GERY-1U-8-C-AC
3D7110 and 3D7120 (Fiber) GERY-1U-8-FM-AC
3D7115 and 3D7125 GERY-1U-4C8S-AC