Version 5.2 Sourcefire 3D System Installation Guide 21
Introduction to the Sourcefire 3D System
Licensing the Sourcefire 3D System
Chapter 1
manages. Also, a blank cell means the license is unsupported, while n/a marks
Defense Center-based licenses that are not relevant to managed devices.
In addition to the information in the table, note that:
• Series 2 devices automatically have Protection capabilities, with the
exception of Security Intelligence filtering.
• Although you can enable a Control license on a virtual device, a virtual
device does not support any of the hardware-based features granted by that
license, such as switching or routing.
• Although the DC500 can manage devices with Protection and Control
licenses, you cannot perform Security Intelligence filtering or user control.
For detailed information on licensing, see the Licensing the Sourcefire 3D System
chapter in the Sourcefire 3D System User Guide.
Supported Licenses by Model
MODELS FIRESIGHT PROTECTION CONTROL URL
F
ILTERING
MALWARE VPN
Series 2 devices:
• 3D500/1000/2000
• 3D2100/2500/
3500/4500
• 3D6500
• 3D9900
n/a automatic,
no Security
Intelligence
Series 3 devices:
• 7000 Series
• 8000 Series
n/a
virtual devices n/a no support
for hardware
features
DC500 Series 2
Defense Center
no Security
Intelligence
no user
control
DC1000/3000
Series 2 Defense
Centers
DC750/1500/3500
Series 3 Defense
Centers
virtual Defense
Centers
To Next Page
Loading...