Waukesha Cherry-Burrell
®
Brand Universal 3 Pump Maintenance
11/2018 95-03103 Page 55
23. Figure 103 shows the O-ring installed in the shaft groove.
24. Install the adjusting ring onto each pump shaft. Make sure to
align the flats on the adjusting ring to the flats on the drive
shafts.
25. Figure 105 shows the adjusting ring installed.
26. Install the rotary seal O-ring on each shaft.
Figure 103 - O-ring installed
Figure 104 - Install adjusting ring
Figure 105 - Adjusting ring installed
Figure 106 - Install O-ring
To Next Page
Loading...
