P340 flexiprobe Operation Manual 33
How to modify your Job Templates
The P340 controller uses Job templates to organize the inspection’s recordings and observation into JOBS
(See Section 9.5) and to assist in the creation of reports.
You can customize your Job templates by using FlexiSight Manager.
1. Copy the Romdrive2.bin file produced by FlexiSight Manager into the root of your storage device.
2. Select Install from storage device to install the custom Job template.
or
3. Select Remove to reset the system to the default Job template.
4. Press OK to reboot.
For further instructions consult the FlexiSight Manager user guide.
To Next Page
Loading...