P340 flexiprobe Operation Manual 58
Creating an observation
To enter the observation form, when a job is active, press OK or Enter.
Observations are numbered sequentially. The observation number is displayed in brackets in the title
bar.
NOTE: If recording, the controller will automatically pause when entering the observation form and resume
when you exit.
Use the ▲ and ▼, Pg Up and Pg Dn keys to navigate the form. You can also key in the desired
field number.
Press OK to edit.
Press CLEAR to delete the selected field content.
Press SAVE to add the observation.
Use the ◄ and ►keys to browse the existing observations.
Press REMOV to delete an existing observation.
Press EXIT to return to the live picture screen.
Default Observation form
The observations form allows you to enter sequential, annotated observations of your survey. Each
observation you make can include position, defect code, comments, grade and a photo.
By default the P340 controller is compatible with the WRC MSCC 3 specifications and as such it contains
WRC Condition Codes when English language is selected.
For other language options, which may not offer any Condition Codes and/or to customize the existing code
list, FlexiSight Manager offers the ability to create new lists or modify existing one and to customize your
P340 controller.
Observation fields:
1. Video: Video file name. This is filled automatically when recording and you should not need to
modify it.
2. Video Time: Video time reference. This is filled automatically when recording and you should not
need to modify it.
3. Photo: File name of the picture associated with the observation. See below for more details
4. Distance: Counter distance value associated to the observation. This is filled automatically and
you should not need tomodify it.
To Next Page
Loading...