Stryker EPIC II Service Manual

Return To Table of Contents
52 2030-809-002 REV D www.stryker.com
7. Press the “Enter/Check” button when completed.
8. The display should present the following message:
“Press Reverse Trend”.
9. Press the reverse trend button.
10. The display should present the following message when the bed in the proper position:
“Release Button”. The message should be flashing.
11. Release the button and do not touch the bed. When the button is released the following message will be
displayed: “Do Not Touch Bed”. The message should be flashing.
12. The display should present the following message when the bed is ready to continue:
“Press Reverse Trend”.
13. Press the reverse trend button.
14. The display should present the following message when the bed is ready to continue:
“Release Button”. The message should be flashing.
15. Release the button and do not touch the bed. When the button is released the following message will be
displayed: “Do Not Touch Bed”. The message should be flashing.
16. The display should present the following message when the bed is ready to continue:
“Press Trend”.
17. Press the trend button.
18. The display should present the following message when the bed in the proper position:
“Release Button”. The message should be flashing.
19. Release the button and do not touch the bed. When the button is released the following message will be
displayed: “Do Not Touch Bed”. The message should be flashing.
20. The display should present the following message when the bed is ready to continue:
“Press Trend”.
21. Press the trend button.
22. The display should present the following message when the bed is ready to continue:
“Release Button”. The message should be flashing.
23. Release the button and do not touch the bed. When the button is released the following message will be
displayed: “Do Not Touch Bed”. The message should be flashing.
24. The display should present the Select Weight Screen.
25. Use the up and down arrow to select the proper weight (200lbs is the default).
26. Press the “Enter/Check” button when the display shows the proper weight.
27. The display should present the following message:
“Place Weight in Center”.
28. Place the weight in the center of the bed.
29. Press the “Enter/Check” button when completed.
30. The display should present the following message:
“Press Reverse Trend”.
31. Press the reverse trend button.
32. The display should present the following message when the bed in the proper position:
“Release Button”. The message should be flashing.
33. Release the button and do not touch the bed. When the button is released the following message will be
displayed: “Do Not Touch Bed”. The message should be flashing.
34. The display should present the following message when the bed is ready to continue:
“Press Reverse Trend”.
35. Press the reverse trend button.
OPTIONAL iBED AWARENESS MAINTENANCE MENU GUIDE (CONTINUED)
Calibrate Scale (Continued)
Service Information

Stryker EPIC II Specifications

General

Brand	Stryker
Model	EPIC II
Category	Medical Equipment
Language	English