134 EN/06.2019/G57 © STULZ GmbH – all rights reserved
C7000 INSTRUCTIONS fOR a/C UNITS
In the menus D6 and D7 you can configure the alarms "air flow
alarm" and "filter alarm" with all corresponding parameters.
In the menu D8 of the Info level you can read and compare the actu-
al and set value of the air pressure in the raised floor or cold aisle
compartment.
Config/Components/Air/
Fan/Alarm (D7)
Operate/Components/Air/Fan
(D6)
Info/Values/Air/Pressure (D8)
To Next Page
Loading...
