158 EN/06.2019/G57 © STULZ GmbH – all rights reserved
C7000 INSTRUCTIONS fOR a/C UNITS
With the selector key you can shift the C7000AT represented by sym-
bol "ME" to a new position and change its bus address this way.
Left display: old position address 0, new position address 17.
To confirm the selection press the OK key.
Now the bus configuration must be confirmed to avoid the display of a
bus error, because a bus participant with the address 0 does not exist
anymore.
The addresses of all other participants are not affected by this.
How to get to the placement view and how to confirm the configuration,
see chapter 3, page 10.
Placement view
To Next Page
Loading...
