INTAKE MANIFOLD
FUEL INJECTION (FUEL SYSTEMS)
8)
Connect the engine harness connector to the
bulkhead harness connectors.
9)
Connect the brake booster vacuum hose.
EN0204
10)
Connect the engine coolant hoses to the throt-
tle body.
11)
Connect the emission hose
to
the PCV valve.
12)
Connect the pressure hose
to
the intake duct.
\
EN0787
13)
Install the power steering pump.
(1)
Install the power steering tank on the brack-
et.
n/
EN0361
(2)
Connect the connector to the power steering
pump switch.
FU(D0HC TURBO)-19
To Next Page
Loading...
