Subaru 2002 Impreza - Page 22

INTAKE MANIFOLD
FUEL INJECTION (FUEL SYSTEMS)
(3) Install the power steering pump, and tighten
19) Connect the connector
to the fuel pump relay.
the bolts.
22 N.m (2.2 kgf-m, 15.9 ff-16)
Tightening torque:
20) Connect the battery ground cable.
21) Lift up the vehicle.
22) Install the under cover.
23) Fill the coolant. <Ref. to CO-25, FILLING OF
(4) Install the power steering pipe brackets on
the right side intake manifold.
COOLANT,
Engine Coolant.>
(5) Install the front side V-belt.
<Ref. to ME(D0HC TURBO)-44, REMOVAL, V-
belt.>
14) Install the cooler filler tank. <Ref.
to CO-51
STALLATION, Coolant Filler Tank.>
15) Connect the accelerator cable.
IN-
16) Install the intercooler. <Ref. to IN(D0HC TUR-
BO)-1 1, INSTALLATION, Intercooler.>
17) Install the air cleaner element.
18) Install the air cleaner upper cover and air intake
duct as a unit. <Ref.
to IN(D0HC TURBO)-7, IN-
STALLATION, Air Cleaner.>
FU(D0HC TURBO)-20