Sun Microsystems Sun Fire X4100 - Page 237

Appendix F Serial Attached SCSI BIOS Configuration Utility F-7
********************************************************************************
* Adapter List Global Properties *
* *
* *
* *
* *
* *
* Pause When Boot Alert Displayed [No] *
* Boot Information Display Mode [Display adapters & installed devices] *
* Support Interrupt [Hook interrupt, the Default] *
* *
* Restore Defaults *
* *
* *
* Esc = Exit Menu F1/Shift+1 = Help *
* Alt+N = Adapter List *
********************************************************************************
F.3.4 Adapter Properties Screen
The Adapter Properties screen (shown below) allows you to view and modify
adapter settings. It also provides access to all other screens.
TABLE F-4 describes the
fields of the screen.
TABLE F-3 Global Properties Screen Field Descriptions
Field Description
Pause When Boot
Alert Displayed
This option specifies whether the BIOS pauses for user
acknowledgement after displaying an alert message during boot.
To continue after displaying a message, select No. To wait for the
user to press a key, select Yes.
Boot Information
Display Mode
This option controls how much information the BIOS displays about
adapters and devices during boot. Possible values are:
• Display adapters only
• Display adapters and all devices
• Display minimal information
• Display adapters & installed devices
Support Interrupt This option allows you to prevent a hook on INT40, if required.
Possible values are:
• Hook interrupt (default)
• Bypass interrupt hooks
Restore Defaults Press Enter to restore the default settings.