Sun Microsystems Sun Fire X4100 - Page 243

Appendix F Serial Attached SCSI BIOS Configuration Utility F-13
SAS Topology Screen 5, Initiator Capabilities
********************************************************************************
* SAS Topology -- SAS1064 *
* Device Identifier Initiator *
* SAS1064(02:03:00) Capabilities *
* * PHY 0 *
* * PHY 1 *
* * PHY 2 SEAGATE ST936701LSUN36G 0456 *
* * PHY 3 SEAGATE ST973401LSUN72G 0356 *
* *
* *
* *
* *
* *
* Esc=Exit F1=Help Alt+M=More Keys *
* Alt+D=Device Properties Alt+E=Expander Properties *
********************************************************************************
TABLE F-5 SAS Topology Screens Field Descriptions
Field Description
Device Identifier The ASCII device identifier string extracted from the device’s inquiry
data.
Discovery Status The status of SAS topology discovery on this directly attached PHY
or on an expander. This field is only an indicator of an error being
encountered. For specific details and the error value, see the
Expander Properties page for expanders and the PHY Properties
page for directly attached PHYs.
Device Info Indicates whether a device is SAS or SATA, and whether the device
has been selected as the boot device.
(SATA is not supported on Sun Fire X4100 or Sun Fire X4200 servers
at this time.)
Negotiated Link
Speed
The negotiated link speed for this PHY, in Gbits/s. This field also
indicates whether the PHY has been disabled.