Index-1
Index
Numerics
10/100/1000BASE-T connector pinouts, E-3
10/100BASE-T connector pinouts, E-2
4GB DIMM, installing gaskets, 3-70
A
accessory kit contents, 1-13
acoustic noise emission specs
Sun Fire X4100, A-3
Sun Fire X4200, A-4
available options, 1-14
B
back panel
LED definitions, C-15
LED locations, C-14
Sun Fire X4200, 1-9
back panel illustration, 1-4
battery
Sun Fire X4200, 3-15
bezel
Sun Fire X4100, 3-7
Sun Fire X4200, 3-11
BIOS
Boot specification for SAS, F-2
changing menu settings, 2-4
configuring, 2-4
menu tree, 2-10, 2-11
Option ROM size, 2-8
overview, 2-4
password reset, 2-54
PCI-X slot priority, 2-5
POST code checkpoints, B-6
POST codes, B-4
POST options, B-3
redirecting console output for POST, B-2
sample setup menu screens, 2-12
SAS RAID, F-1
setup screens summary, 2-8
special considerations, 2-5
updating, 2-62
C
Clear CMOS jumper, 2-60
comments and suggestions, -xiii
component overview figure
Sun Fire X4100 M2, 1-8
Sun Fire X4100/X4100 M2, 1-6
Sun Fire X4200, 1-10
Configuration Utility screens for SAS BIOS, F-3
configurations for DIMMs, 3-67, 3-68
configuring BIOS, 2-4
connector pinouts
10/100/1000BASE-T, E-3
10/100BASE-T, E-2
Ethernet 10/100, E-2
Ethernet 10/100/1000, E-3
fan module, E-18
flex cable DVD-ROM drive, E-12
flex cable motherboard, E-7
flex cable power distribution board, E-11
front I/O interconnect cable, E-15
motherboard bus bar power, E-14
power supply, E-17
serial, E-2
To Next Page
Loading...
