Sun Microsystems Sun Fire X4100 - Page 274

Index-2 Sun Fire X4100/X4100 M2 and X4200/X4200 M2 Servers Service Manual • August 2009
serial attached SCSI, E-5
USB 1.1, E-1
VGA video, E-4
console output, redirecting, B-2
CPU
fault LED, C-19
CPU replacement
M2 only, 3-23
Sun Fire X4200 only, 3-17
D
DC power supply cautions, 3-83
DIMM replacement, 3-62
DIMMs
4GB DIMM installation, 3-70
fault LEDs, C-18
population rules, 3-65
population rules for Sun Fire X4100, 3-65
supported configurations, 3-67, 3-68
supported configurations for Sun Fire X4100, 3-
65
documentation, related, -xii
driver updates, -xi
DVD drive
replacement, 3-31
upgrade kit, 3-34
E
emergency shutdown, 2-3
environmental specs
Sun Fire X4100, A-2
Sun Fire X4200, A-4
Ethernet 10/100 connector pinouts, E-2
Ethernet 10/100/1000 connector pinouts, E-3
Ethernet port, 2-6
Ethernet Port Mapping, 2-6
external LEDs, C-11
F
Fan connector board
replacement, 3-41
fan module
connector pinouts, E-18
fault LEDs, C-19
replacement, 3-38
feature summary, 1-1
firmware updates, -xi
flex cable
DVD-ROM drive connector pinouts, E-12
motherboard connector pinouts, E-7
power distribution board connector pinouts, E-
11
Force Recovery jumper, 2-58
front bezel
Sun Fire X4100, 3-7
Sun Fire X4200, 3-11
front cover
Sun Fire X4100, 3-8
Sun Fire X4200, 3-12
Front Fan Fault LED, C-13
front I/O board replacement, 3-46
front I/O interconnect cable connector pinouts, E-15
front panel
LED definitions, C-13
LED locations, C-12
Sun Fire X4200, 1-8
front panel illustration, 1-4
front panel indicator board replacement, 3-44
Fusion-MPT SAS BIOS, See SAS BIOS
G
graceful shutdown, 2-3
GRASP board
power status LED, C-19
replacement, 3-51
H
HDD
replacement, 3-54
status LEDs, C-14
HDD backplane
replacement, 3-57
heatsink replacement
M2 only, 3-23
Sun Fire X4200 only, 3-17
hot spares, F-36
I
internal LEDs, C-16
J
jumpers