3-58 ENGINE
OIL PRESSURE SWITCH
• Remove the oil pressure switch
1.
• Inspect the oil pressure switch. (!8-34)
• Apply SUZUKI BOND to the thread part of the oil pressure
switch
1 and tighten it to the specified torque.
+99104-31140: SUZUKI BOND “1207B” (USA)
99000-31140: SUZUKI BOND “1207B” (Others)
$ Oil pressure switch: 13 N·m (1.3 kgf-m, 9.5 lb-ft)
NOTE:
Be careful not to apply SUZUKI BOND to the hole of the thread
end.
OIL STRAINER
• Remove the oil strainer plate
1.
• Remove the oil strainer
2.
• Clean the oil strainer with a compressed air.
PartShark.com
877-999-5686
To Next Page
Loading...
