ENGINE 3-87
REAR CAM CHAIN
• Install the rear cam chain
1.
• Install the cam chain tensioner
2, washer
3 and cam chain
tensioner bolt
4.
• Tighten the cam chain tensioner bolt
4 to the specified
torque.
$ Cam chain tensioner bolt: 10 N·m (1.0 kgf-m, 7.0 lb-ft)
NOTE:
The front and rear cam chain tensioners are the same.
PRIMARY DRIVE GEAR
• Install the primary drive gear
1 and water pump drive gear
2.
• Hold the generator rotor (crankshaft) with the special tool.
" 09930-44530: Rotor holder
• Tighten the primary drive gear bolt to the specified torque.
$ Primary drive gear bolt: 70 N·m (7.0 kgf-m, 50.5 lb-ft)
NOTE:
This bolt has left-hand thread.
PartShark.com
877-999-5686
To Next Page
Loading...
