3-88 ENGINE
OIL PIPE
• Install the oil pipe
1.
• Tighten the oil pipe stopper screw
2 to the specified torque.
$ Oil pipe stopper screw: 8 N·m (0.8 kgf-m, 6.0 lb-ft)
NOTE:
Align the projection
A
of the oil pipe with the groove
B
of its
stopper.
GEARSHIFT SYSTEM
• Install the gearshift cam stopper
1, its bolt
2, washer
3 and
return spring
4.
$ Gearshift cam stopper bolt: 10 N·m (1.0 kgf-m, 7.0 lb-ft)
• Confirm the gearshift cam stopper movement.
• Check the neutral position.
NOTE:
Hook the return spring end
5
to the stopper.
• Install the gearshift cam stopper plate
6 with the gearshift
cam pins
A inserted into the gearshift cam stopper plate
holes
B.
PartShark.com
877-999-5686
To Next Page
Loading...
