ENGINE 3-89
• Apply a small quantity of THREAD LOCK to the gearshift cam
stopper plate bolt and tighten it to the specified torque.
%99000-32050: THREAD LOCK “1342”
$ Gearshift cam stopper plate bolt: 13 N·m
(1.3 kgf-m, 9.5 lb-ft)
• Install the gearshift shaft/gearshift arm
7 with the washer
8
as shown.
• Locate the gearshift arm stopper
9 between return spring
ends
C.
• Install the washer
0 and snap ring
A.
OIL PUMP
• Install the oil pump with the three screws.
PartShark.com
877-999-5686
To Next Page
Loading...
