Suzuki DL650K5 - Page 144

3-90 ENGINE
• Install the washer

1 and pin

2.
• Install the oil pump driven gear

3.
• Install the snap ring

4.
CLUTCH
• Install the spacer

1 and apply ENGINE OIL to it.
• Install the primary driven gear assembly

2 onto the counter-
shaft.
NOTE:
Be sure to engage the oil pump drive and driven gears, primary
drive and driven gears.
• Install the thrust washer

3.
• Install the clutch sleeve hub

4 and lock washer

5.
#
• Install the clutch sleeve hub nut

6.
NOTE:
The chamfer side

A
of the clutch sleeve hub nut faces outward.
Replace the lock washer

5 with a new one.
PartShark.com
877-999-5686