• Remove the fuel injectors.
• Remove the TP sensor 7 and STP sensor 8 with the special
tool.
# 09930-11950: Torx wrench
NOTE:
Prior to disassembly, mark each sensor’s original position with a
paint or scribe for accurate reinstallation.
%
%
Never remove the STVA 9 and throttle body link
plates 0.
These adjusting screws (A, B, C) are factory-
adjusted at the time of delivery and therefore avoid
removing or turning them unless otherwise neces-
sary.
13-54 DL650K7/AK7 (’07-MODEL)
PartShark.com
877-999-5686
To Next Page
Loading...
