121
5550
24. Place transmission or floor jack under “engine with
transmission”. Place wood blocks between trans-
mission and jack so that engine with transmission is
held horizontally even when motor mount bolts are
removed.
5559
25. Place engine hoist lift arm through right hand door,
and attach with lift chain to engine. ( You may want
to remove the steering wheel to give you more room
for the hoist and engine. Refer to your chassis ser-
vice manual for proper removal of steering wheel).
26. Remove motor mount bolts.
27. Remove transmission mounting bracket bolts.
CAUTION
!
Before starting to lift the engine, check once
again to be sure that their is no connection
left undone!
To Next Page
Loading...
